12mm Laboratory Organic & Solid State Membrane Ion Selective Electrodes

General Specifications for 12mm Organic Ion Selective Electrodes:

• Electrodes are manufactured with 1 meter of cable and BNC Connector.   No other options are available at this time.  See above drawing for dimension details of ISE electrodes.
• Organic Membrane Electrodes are manufactured with rigid PVC bodies.
• Electrodes are manufactured with 16mm caps.
• Organic Membrane Electrodes are rated to 5 - 40^o Celsius Continuous, Maximum  0 - 60^o Celsius Intermittent
• Standard Shelf Life is 1 year from date of manufacture.
• ***Interfering Ions are expressed in ratios of permissible excess.   The value defines the point at which the response to the interfering ion is more than one standard deviation of the measured ion.  This ratio is defined by the following quotient:
  (Concentration of Interfering Ion in Molarity / Concentration of Measured Ion in Molarity)
• The lowest limit of detection and  linear measurement range are expressed in units of Molarity followed by the equivalents in units of parts per million (ppm)

General Specifications for 12mm Solid State Ion Selective Electrodes:

• Electrodes are manufactured with 1 meter of cable and BNC Connector.   No other options are available at this time.  See above drawing for dimension details of ISE electrodes.
• Solid State Membrane Electrodes are manufactured with Ryton (PPS) bodies.
• Electrodes are manufactured with 16mm caps.
• Solid State Membrane  electrodes are rated to 5 - 50^o Celsius Continuous, Maximum -5 - 100^o Celsius Intermittent
• Standard Shelf Life is 1 year from date of manufacture.
• ***Interfering Ions are expressed in ratios of permissible excess.   The value defines the point at which the response to the interfering ion is more than one standard deviation of the measured ion.  This ratio is defined by the following quotient:
  (Concentration of Interfering Ion in Molarity / Concentration of Measured Ion in Molarity)
• The lowest limit of detection and  linear measurement range are expressed in units of Molarity followed by the equivalents in units of parts per million (ppm)

12mm Laboratory Reference Electrodes

General Specifications for 12mm Reference Electrodes:

• Electrodes come complete with 1 meter of cable and standard Reference Pin Connector.   No other options are available at this time.  See above drawing for dimension details of reference electrodes.
• Glass construction reference electrode are manufactured with Pyrex Glass Bodies and Large Surface Porous Ceramic Junctions.  Plastic construction reference electrode are manufactured with PVC bodies and large surface Porous Ceramic Junctions.
• Reference Model RC 301 is only recommended for applications where ease of use and convenience (non-refillable immobilized gel system) are the primary requirement of the application.  For maximum accuracy, reference model RC 401, 501 & 601 should be employed.
• The standard pH range for All Reference Electrodes is 0-14.
• Reference Electrodes use Ag/AgCl Half-Cells.
• Reference Electrodes come standard with 16mm Caps.
• Standard Shelf Life is 1 year from date of manufacture.
• Make sure to review the recommended reference electrode for the ion selective measurement that will be performed.